Samson薩姆森3709型氣動鎖緊閥
Safety instructions and measures
Intended use
The Type 3709 Pneumatic Lock-up Valve shuts off the signal pressure line either when the airsupply falls below an adjusted value or upon complete air supply failure. This causes thepneumatic actuator to remain in its last position.
The device is designed to operate under exactly defined conditions (e.g. operating pressure,temperature). Therefore, operators must ensure that the lock-up valve is only used in operat-ing conditions that meet the specifications used for sizing the device at the ordering stage. Incase operators intend to use the lock-up valve in other applications or conditions than speci-fied, contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de-vice for its intended purpose or for damage caused by external forces or any other external .factors.
> Refer to the technical data for limits and fields of application as well as possible uses.Reasonably foreseeable misuse
The Type 3709 Lock-up Valve is not suitable for the followingn applications:- Use outside the limits defined during sizing and by the technical dataFurthermore, the following activities do not comply with the intended use:Use of non-original spare parts
Performing maintenance activities not specified by SAMSON
在線客服
企業微信
點擊圖片查看原圖
[VIP第3年] 指數:7
通過認證 
